Willkommen, Gast. Bitte Einloggen.
YaBB - Yet another Bulletin Board
14.12.2018 um 04:25:45
News: Neuanmeldung ins Forum muss über den Forumsbetreiber laufen. Bitte per Mail anfordern.
Home Hilfe Suchen Einloggen


Seiten: 1
Thema versenden Drucken
Turning everything 180 degrees (Gelesen: 1256 mal)
Sverre_Monsen
Senior Member
****


Ich steh auf
170er...

Beiträge: 74
Geschlecht: male
Turning everything 180 degrees
11.08.2017 um 17:48:05
 
Hi dear 170-friends. The ignition is nearly perfect, but now I have to remove one spark plug to add grease in the lubrication cup. Is it possible to turn everything 180 degrees and can something go wrong when doing it? I think I need a good advice Smiley
Best regards
Sverre
zum Seitenanfang
 
E-Mail   IP gespeichert
jimattsson
Senior Member
****


Gammal kärlek    
rostar aldrig

Beiträge: 1071
Geschlecht: male
Re: Turning everything 180 degrees
Antworten #1 - 12.08.2017 um 20:12:39
 
Hello Sverre, I answered in the German forum as well. The distributor doesn't care in which direction it points, of course as long that you also move the ignition cables to the spark plug of the correct cylinder. You may turn it 90°, 180° or 270°, whichever fits the situation best.
zum Seitenanfang
 
 

Grüße aus Schweden
Jan Ivar Mattsson
Mercedes-Benz 170 S Bj. 1950
Volvo PV 60 Bj. 1946
E-Mail Homepage   IP gespeichert
Sverre_Monsen
Senior Member
****


Ich steh auf
170er...

Beiträge: 74
Geschlecht: male
Re: Turning everything 180 degrees
Antworten #2 - 13.08.2017 um 13:24:31
 
Hello Jim
I am very thankful for your good advice and help. I will try to adjust it due to your advice.  
Best regards Sverre
zum Seitenanfang
 
 
E-Mail   IP gespeichert
jimattsson
Senior Member
****


Gammal kärlek    
rostar aldrig

Beiträge: 1071
Geschlecht: male
Re: Turning everything 180 degrees
Antworten #3 - 13.08.2017 um 21:21:30
 
Hello Sverre, as Alfred pointed out in the German section, the oil pump when installed must be oriented so that the notch on the pump axle for the distributor drive is parallel with the camshaft, when cylinder 1 is at TDC. I enclose a section of the shop manual in English. If you don't already have the English shop manual, let me know. I can send it to you as a pdf file.
zum Seitenanfang
 

Grüße aus Schweden
Jan Ivar Mattsson
Mercedes-Benz 170 S Bj. 1950
Volvo PV 60 Bj. 1946
E-Mail Homepage   IP gespeichert
Sverre_Monsen
Senior Member
****


Ich steh auf
170er...

Beiträge: 74
Geschlecht: male
Re: Turning everything 180 degrees
Antworten #4 - 13.08.2017 um 22:25:15
 
Hi Jim
Thank you very much. What should I do without you. Now I understand. As far as I know or for sure not after I bought the car the engine has not been opened. It is running nice and this is the only little problem. I have a litle leak in a zimring between the engine and the gearbox so sooner or later I have to take out the engine and then I will put everything together correctly. I have found other small strange repairs done maybe early in the '50 without correct spareparts, so I had to put it back in original mode. If you have the repairbook digital I would like to get a copy on my mailadress.  Smiley
 
Thank you very much!
 
Best regards Sverre
zum Seitenanfang
 
 
E-Mail   IP gespeichert
jimattsson
Senior Member
****


Gammal kärlek    
rostar aldrig

Beiträge: 1071
Geschlecht: male
Re: Turning everything 180 degrees
Antworten #5 - 13.08.2017 um 22:36:44
 
Hej Sverre - jag har skickat filen. Du har ett mejl om detta.
zum Seitenanfang
 
 

Grüße aus Schweden
Jan Ivar Mattsson
Mercedes-Benz 170 S Bj. 1950
Volvo PV 60 Bj. 1946
E-Mail Homepage   IP gespeichert
Sverre_Monsen
Senior Member
****


Ich steh auf
170er...

Beiträge: 74
Geschlecht: male
Re: Turning everything 180 degrees
Antworten #6 - 13.08.2017 um 22:39:13
 
Tusen takk skal du ha! Gleder meg til å lese!  Smiley
Beste hilsen
Sverre
zum Seitenanfang
 
 
E-Mail   IP gespeichert
Seiten: 1
Thema versenden Drucken